EA100
Extension Arm
The EA100 extension arm has been developed to further exploit the unique possibilities of swing arms and to significantly improve the reach of
excavators. The extension arm has a length of over 100 cm and is compatible with the DRHS34.
This combination allows hedge trimmers to be placed in the correct position in relation to the hedge. This also makes it possible to effectively
trim the rear of the hedge. This combination is suitable for hedge trimmers with a weight of maximum 250 kg.
If the correct attachment plate is mounted, the extension arm can be connected to almost any machine.
About the EA100
The EA100 has a fixed length of 104 cm. The machine is equipped with a tilting cylinder so that hedge trimmers can be placed in the correct position in relation to the hedge. Wire passages for the double rotator and hedge trimmer drive have been pre-assembled. The wires needed to power the double rotator and hedge trimmer can be neatly and safely passed through the ducts. This useful extension improves the deployability of your swing loader as well as the trimming reach of your excavator.
Hedge trimmer and double rotator not included.
EA100
Extension arm to significantly increase the working range!
| Type | EA100 |
| Rotation angle | 57 degrees |
| Weight | 90 kg |
| Maximaal weight tool(s) | 360 kg |
| Required dual hydraulic functions | 1 |
| Max. oil pressure | 210 bar |
Take a note:
A separate continuous volume flow is needed to power your trimmer/tool
